SURFACE MODIFICATION METHODS FOR INCREASING THE SERVICE LIFE OF MECHANICAL ENGINEERING COMPONENTS

Main Article Content

R.T. Nurullaev
B.I. Rakhimboev

Abstract

Mechanical engineering components are often subjected to severe operating conditions such as friction, wear, corrosion, and high mechanical loads. These factors significantly reduce the service life and reliability of machine parts. Surface modification technologies have become an effective approach to improving the durability and performance of mechanical components. This study investigates various surface modification methods used to enhance the service life of mechanical engineering components. The research focuses on coating technologies, surface hardening methods, and advanced material treatment techniques. Analytical and comparative research methods were applied based on scientific literature and industrial practices. The results show that surface modification technologies significantly improve wear resistance, corrosion resistance, and mechanical strength of machine components. Furthermore, modern techniques such as laser surface treatment and plasma coating provide higher efficiency and reliability compared to traditional methods. The study highlights the importance of advanced surface engineering technologies in improving the performance and service life of mechanical engineering components.

Article Details

Section

Articles

References

1.Davis J.R. Surface Engineering for Corrosion and Wear Resistance.

2.Holmberg K., Matthews A. Coatings Tribology.

3.Totten G.E. Steel Heat Treatment Handbook.

4.Bhushan B. Modern Tribology Handbook.

5.Abduvaliev, U., Jumaev, A., Nurullaev, R., Jakhonov, S., & Jurakulov, I. (2024). Investigation of the process of the influence of winding spindles with cotton fiber on the performance of a cotton picker. In E3S Web of Conferences (Vol. 548, p. 04013). EDP Sciences.

6.Abduvaliev, U., Jumaev, A., Nurullaev, R., Ashirov, A., & Abdurafikov, B. (2024, August). Influence of the Sectional Shape of the Grabbing Element of a Screw Composite Spindle on Agricultural Performance and Stability of Operation of a Cotton-Picking Machine. In International Conference on Reliable Systems Engineering (pp. 288-296). Cham: Springer Nature Switzerland.

7.Абдувалиев У. А., Мамиров Ш. Ш. Ў., Нуруллаев Р. Т. Ў. ВЛИЯНИЕ ШЕРОХОВАТОСТИ ПОВЕРХНОСТИ ШПИНДЕЛЕЙ НА ЗАЗЕЛЕНЕНИЕ И СТАБИЛЬНОСТЬ РАБОТЫ ХЛОПКОУБОРОЧНОГО АППАРАТА //Universum: технические науки. – 2023. – №. 5-2 (110). – С. 37-40.

8.Abduvaliev U. A., Mamirov S. S., Nurullaev R. T. The influence of spindle surface roughness on greening and stability of the cotton picker //Univers. Techn. Sci. Electron. Sci. Mag. – 2023. – Т. 5. – №. 110. – С. 46-54.

9.Абдувалиев, У. А., Нуруллаев, Р. Т., & Жахонов, Ш. А. (2024). Влияние Физико-Механических Свойств Хлопчатника И Рельефа Поля На Стабильность Работы Шпинделей Хлопкоуборочной Машины. Miasto Przyszłości, 44, 167-169.

10.Abduvaliev UA, Mamirov SS, Nurullaev RT. The influence of spindle surface roughness on greening and stability of the cotton picker. Univers. Techn. Sci. Electron. Sci. Mag. 2023;5(110):46-54.

11.Нуруллаев, Р. Т. (2022, September). Теоретико-экспериментальные исследовния активности шпинделей. In Материалы международной конференции. Наманган (pp. 23-24).

12.Абдувалиев, У. А., Нуруллаев, Р. Т., & Хазраткулов, Д. (2025). ТЕОРЕТИКО-ЭКСПЕРИМЕНТАЛЬНЫЕ ИССЛЕДОВАНИЯ СТАБИЛЬНОСТИ РАБОТЫ ХЛОПКОУБОРОЧНОГО АППАРАТА. Global Science Review, 1(1), 297-302.

13.Kalpakjian S., Schmid S. Manufacturing Engineering and Technology.

14.Абдувалиев, У. А., & Нуруллаев, Р. Т. Ў. (2023). SHPINDEL SIRTIDAGI TISHLARNING JOYLASHISHI ZICHLIGI VA BIR TEKISDALIGINI ANIQLASH. Механика и технология, 2(11), 46-54.