OPTIMIZATION OF HYDROCHEMICAL PRECIPITATION PROCESSES FOR THE SELECTIVE RECOVERY OF HIGH-PURITY NICKEL (II) FROM METALLURGICAL TECHNOGENIC SOLUTIONS
Main Article Content
Abstract
This research focuses on the optimization of the hydrochemical precipitation process to selectively recover high-purity nickel (II) from complex multicomponent technogenic solutions generated at the "Almalyk MMC" JSC. Following the sequential extraction of copper and cobalt, the remaining nickel-bearing liquor was systematically treated using sodium hydrogen phosphate (Na2HPO4) in a controlled acetic acid (CH3COOH)buffer system. Experimental trials were conducted to evaluate the influence of pH, temperature, reaction kinetics, and stoichiometric reagent ratios on the crystallization efficiency of nickel phosphate (Ni3(PO4)2 The optimal process parameters were established at a pH range of 4.5–5.0, a temperature spectrum of 20–25°C, and a precipitation duration of 10–15 minutes, resulting in a distinct green crystalline matrix. The structural configuration, chemical purity, and crystalline phase variations of the recovered nickel precipitates were comprehensively validated using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), X-ray Diffraction (XRD), and Spectrolab M10 optical emission profiling. The developed hydrochemical framework offers a high-selectivity, low-energy, and environmentally sustainable technological pathway for the production of industrial-grade nickel salts from secondary metallurgical waste streams.Keywords: Nickel precipitation; Chemical technology; Hydrochemistry; Crystalline phase; ICP-OES; Waste valorization.
Article Details
Section
References
1.Sole, K.C., & Cole, P.M. (2002). Solvent extraction of cobalt and nickel by Cyanex 272. Hydrometallurgy, 64(1), 43–56.
2.Xie, F., Zhang, T.A., Dreisinger, D., & Doyle, F. (2014). A critical review on solvent extraction of cobalt and nickel from laterite leach solutions. Minerals Engineering, 56, 10–28.
3.Zhu, Z., Pranolo, Y., & Cheng, C.Y. (2012). Separation of cobalt and nickel from sulfate solutions using Cyanex 272. International Journal of Mineral Processing, 104–105, 32–37.
4.Parhi, P.K., Sarangi, K., Nathsarma, K.C., & Park, K.H. (2008). Recovery of cobalt and nickel from industrial waste solutions by solvent extraction. Journal of Hazardous Materials, 151(2–3), 324–332.
5.Gandin, J., & Mansur, M.B. (2022). Separation of cobalt and nickel by solvent extraction using Cyanex 272. Separation and Purification Technology, 295, 121287.
6.Sattar, R., Anwar, M.N., & Farooq, R. (2019). Hydrometallurgical treatment of cobalt- and nickel-bearing wastes: A review. Journal of Environmental Chemical Engineering, 7(5), 103387.
7.Ritcey, G.M. (2006). Solvent Extraction: Principles and Applications to Process Metallurgy. Amsterdam: Elsevier.
8.Rydberg, J., Cox, M., Musikas, C., & Choppin, G.R. (2004). Solvent Extraction Principles and Practice (2nd ed.). New York: Marcel Dekker.
9.Habashi, F. (1997). Handbook of Extractive Metallurgy. Weinheim: Wiley-VCH.
10.Rao, S.R. (2006). Resource Recovery and Recycling from Metallurgical Wastes. Amsterdam: Elsevier.
11.Gupta, C.K., & Mukherjee, T.K. (1990). Hydrometallurgy in Extraction Processes. Boca Raton: CRC Press.
12.Skoog, D.A., Holler, F.J., & Crouch, S.R. (2018). Principles of Instrumental Analysis (7th ed.). Boston: Cengage Learning.
13.Wang, L., & Lee, M.S. (2020). Separation of cobalt and nickel from sulfate solutions by solvent extraction techniques. Hydrometallurgy, 191, 105229.
14.Li, X., Zhang, Y., & Chen, J. (2023). Recovery of valuable metals from metallurgical wastes through hydrometallurgical processes. Minerals Engineering, 198, 108093.
15.O‘zbekiston Respublikasi Prezidentining rangli metallurgiya sanoatini rivojlantirish va texnogen chiqindilarni qayta ishlash samaradorligini oshirishga oid qarorlari va farmonlari.