TECHNOLOGICAL PROCESSES OF ORGANIC SYNTHESIS: PROCESS-LEVEL STRUCTURE, GREEN METRICS AND ENABLING TECHNOLOGIES

Main Article Content

Yusupova Mahliyo Azamatovna

Abstract

This article examines the technological processes of organic synthesis as an integrated system of chemical transformation, separation, purification and waste-management operations rather than as a single reaction step. The aim is to identify, on the basis of published evidence and transparent calculations, the technological decisions that most strongly determine the material efficiency, safety and scalability of organic synthesis. A structured analytical review of peer-reviewed literature (1991–2023) was combined with quantitative evaluation of atom economy for representative reaction types and with a comparative analysis of two industrial case studies: the manufacture of ibuprofen (Boots and BHC routes) and of sitagliptin (rhodium-catalysed asymmetric hydrogenation versus transaminase biocatalysis). The calculations show that atom economy ranges from 100% for addition reactions such as the Diels–Alder reaction and catalytic hydrogenation to 25.7% for the Wittig methylenation of cyclohexanone, and that the change from a stoichiometric six-step route to a catalytic three-step route raises the atom economy of ibuprofen synthesis from about 40% to 77.5%. Published data further indicate that solvents account for the largest share of process mass in fine-chemical and pharmaceutical manufacture, and that continuous-flow, microwave-assisted and biocatalytic technologies improve heat transfer, selectivity or safety under defined conditions. A five-stage decision framework for designing technological processes of organic synthesis is proposed. The results can be used in process development and in teaching organic technology.

Article Details

Section

Articles

References

1.Anastas, P. T., & Warner, J. C. (1998). Green chemistry: Theory and practice. Oxford University Press.

2.Cann, M. C., & Connelly, M. E. (2000). Real-world cases in green chemistry. American Chemical Society.

3.Capello, C., Fischer, U., & Hungerbühler, K. (2007). What is a green solvent? A comprehensive framework for the environmental assessment of solvents. Green Chemistry, 9(9), 927–934. https://doi.org/10.1039/B617536H

4.Constable, D. J. C., Curzons, A. D., & Cunningham, V. L. (2002). Metrics to ‘green’ chemistry—which are the best? Green Chemistry, 4(6), 521–527. https://doi.org/10.1039/B206169B

5.Dunn, P. J. (2012). The importance of green chemistry in process research and development. Chemical Society Reviews, 41(4), 1452–1461. https://doi.org/10.1039/C1CS15127D

6.FDA. (2004). Guidance for industry: PAT—A framework for innovative pharmaceutical development, manufacturing, and quality assurance. U.S. Department of Health and Human Services, Food and Drug Administration.

7.Gutmann, B., Cantillo, D., & Kappe, C. O. (2015). Continuous-flow technology—A tool for the safe manufacturing of active pharmaceutical ingredients. Angewandte Chemie International Edition, 54(23), 6688–6728. https://doi.org/10.1002/anie.201409318

8.Hessel, V., Kralisch, D., Kockmann, N., Noël, T., & Wang, Q. (2013). Novel process windows for enabling, accelerating, and uplifting flow chemistry. ChemSusChem, 6(5), 746–789. https://doi.org/10.1002/cssc.201200766

9.ICH. (2009). ICH harmonised tripartite guideline: Pharmaceutical development Q8(R2). International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use.

10.Jiménez-González, C., Ponder, C. S., Broxterman, Q. B., & Manley, J. B. (2011). Using the right green yardstick: Why process mass intensity is used in the pharmaceutical industry to drive more sustainable processes. Organic Process Research & Development, 15(4), 912–917. https://doi.org/10.1021/op200097d

11.Kappe, C. O. (2004). Controlled microwave heating in modern organic synthesis. Angewandte Chemie International Edition, 43(46), 6250–6284. https://doi.org/10.1002/anie.200400655

12.Plutschack, M. B., Pieber, B., Gilmore, K., & Seeberger, P. H. (2017). The Hitchhiker’s guide to flow chemistry. Chemical Reviews, 117(18), 11796–11893. https://doi.org/10.1021/acs.chemrev.7b00183

13.Prat, D., Wells, A., Hayler, J., Sneddon, H., McElroy, C. R., Abou-Shehada, S., & Dunn, P. J. (2016). CHEM21 selection guide of classical- and less classical-solvents. Green Chemistry, 18(1), 288–296. https://doi.org/10.1039/C5GC01008J

14.Roschangar, F., Sheldon, R. A., & Senanayake, C. H. (2015). Overcoming barriers to green chemistry in the pharmaceutical industry – the Green Aspiration Level™ concept. Green Chemistry, 17(2), 752–768. https://doi.org/10.1039/C4GC01563K

15.Savile, C. K., Janey, J. M., Mundorff, E. C., Moore, J. C., Tam, S., Jarvis, W. R., Colbeck, J. C., Krebber, A., Fleitz, F. J., Brands, J., Devine, P. N., Huisman, G. W., & Hughes, G. J. (2010). Biocatalytic asymmetric synthesis of chiral amines from ketones applied to sitagliptin manufacture. Science, 329(5989), 305–309. https://doi.org/10.1126/science.1188002

16.Sheldon, R. A. (2007). The E factor: Fifteen years on. Green Chemistry, 9(12), 1273–1283. https://doi.org/10.1039/B713736M

17.Sheldon, R. A. (2017). The E factor 25 years on: The rise of green chemistry and sustainability. Green Chemistry, 19(1), 18–43. https://doi.org/10.1039/C6GC02157C

18.Sheldon, R. A., Arends, I., & Hanefeld, U. (2007). Green chemistry and catalysis. Wiley-VCH.

19.Sheldon, R. A., & Woodley, J. M. (2018). Role of biocatalysis in sustainable chemistry. Chemical Reviews, 118(2), 801–838. https://doi.org/10.1021/acs.chemrev.7b00203

20.Stoessel, F. (2008). Thermal safety of chemical processes: Risk assessment and process design. Wiley-VCH.

21.Trost, B. M. (1991). The atom economy—A search for synthetic efficiency. Science, 254(5037), 1471–1477. https://doi.org/10.1126/science.1962206